jump to navigation

Taking an Artificial Leaf Out of Nature’s Book March 13, 2010

Posted by calvinus in Energy, Nano, Renewables, Solar.
Tags: , , ,
add a comment

Solar cells are common enough.  Small solar cells are found in a variety everyday applications.  The normal example I give is in calculators although it looks like these are becoming less and less common if my students are anything to go by – many of my first years don’t own a “proper” calculator – iPhones are the order of the day. However, plonk a solar cell on the side of a building and we have an additional problem. Buildings tend not to move, but the sun does which means you are limited practically to south-facing surfaces. Now, a full GIS study of how to maximise the power harvested by solar cells in a built-up area would help overcome some of this problem, but it doesn’t solve another issue.  Dirt!

Would you eat your dinner off the street?  Stick something in an urban environment and you will inevitably get all manner of dust, detritus and general keech stuck to it.  A layer of grime on your shiny solar cells means light will not make it through to the photovoltaic underneath, which means a less efficient solar cell.  Yi Cui at Stanford University has come up with an elegant way around this dirty issue.

What gives lotus leaves their water repelling properties are tiny spikes along the surface of the leave which stops water droplets from wetting the surface.  Given that most dust particles are deposited on glass surfaces after rainfall, Cui figured it would be useful to put this to good effect in solar cells.  By pattering the amorphous silicon that solar cells are often made from in a way that mimics the lotus leaf, water droplets can run off the surface taking any dirt with them, rather than sticking around and evaporating (which would leave the dirt behind)[1]

There is an additional, more fundamental benefit to this type of patterning.  This films of amorphous silicon tend to be pretty flat. They also have a habit of behaving a little too much like a mirror than is useful for a solar cell.  If you absorb light, you generate electricity; if you reflect light, like a mirror, you lose efficiency.  The roughened “domed” structure means that less light is reflected.  Cui saw this in their results – their rough structured cells were found to be 5.9% efficient, which is better than the 4.7% efficiency for flat, smooth surfaces.  Sometimes it pays to take the rough with the smooth.

ResearchBlogging.org [1] Zhu, J., Hsu, C., Yu, Z., Fan, S., & Cui, Y. (2009). Nanodome Solar Cells with Efficient Light Management and Self-Cleaning Nano Letters DOI: 10.1021/nl9034237


Recharge Your Batteries November 15, 2009

Posted by calvinus in Batteries, Energy, Physical Chemistry, Renewables.
Tags: , , ,

This post was chosen as an Editor's Selection for ResearchBlogging.org Every so often, you come across an article that looks really interesting.  Interesting in a good way .  Often you get the chance to review manuscripts that are “interesting”, but this is not one of those.

I was actually looking for something else and in the process of re-establishing some order to the chaos, this Chemical Communications article popped up from the pile.  Renewable electrochemical systems, i.e., rechargeable batteries, have long undergone development and if I compare my first rechargeable batteries with the lifetime of the battery in the laptop I am using at the moment, the difference is night and day.  Having said that, such efficiencies may partly bedown to better power management.  The underlying technology is not that radically different.  As Jean-Marie Tarascon commented at a meeting at the Royal Society in London at the start of this year, rechargeable battery research has advanced at an almost glacial pace.  As such, we are still a long way off using batteries for heavy-duty use such as in transport.  Sure, there are cars such as the Tesla of the Chevy Volt that are battery powered, but there are still issues with the weight and safety (and cost!) of many rechargeable systems.  For example, 1 litre of petrol still has a higher energy capacity that the Li ion batteries that your laptop or mobile invariably use.[1]

Energy Capacity

Copyright of the Royal Society of Chemistry

Nothing beats petrol, litre for litre, that we can easily use.

Except, you will notice from the above image that there is something that has a higher energy capacity.  Stuart Licht and colleagues at MIT have developed an electrochemical system that is based on air and borides, in their particular case, vanadium boride.[1]

As Licht himself says in his article, air batteries are nothing new – Zn/air batteries were first reported in 1932.[2]  Nonetheless, it is only comparatively recently that air batteries have started to receive serious attention.  The work of STAIR springs to mind.  It stands to reason that if half of your battery “runs” on air, then your cost and weight drop – you do not have to carry around as much of the chemicals you might originally have required.

Licht’s work shows substantial promise.  He has developed a system with a higher capacity than petrol based on vanadium boride despite the fact that “basic physical chemical properties of VB2 are scarce.”  There is much scope for improvement on something which is already an excellent start.

Can we improve the vanadium boride?

Can we find a low-temperature/”easy” way of preparing vanadium boride?

Are there better materials?

We shall see.

ResearchBlogging.org [1] Licht, S., Wu, H., Yu, X., & Wang, Y. (2008). Renewable highest capacity VB2/air energy storage Chemical Communications (28) DOI: 10.1039/b807929c

[2] Kinoshita, K, Electrochemical Oxygen Technology, Wiley-Verlag VCH, Weinheim, Germany, 1992, pp. 259-260.